If you don't believe me, simply check the parameters of the few alleged 19E Channels you do get against the Listings on flysat, lyngsat or kingofsat. then eat dirt!!Įdit: Port A = LNB1 and Port B = LNB2, so Hotbird = LNB 1 and Astra 1 = LNB 2
So when you scan, it just finds a few duplicate Hotbird Channels that happen to coincide in Frequency, Polarisation and Symbol Rate with some of those used also by Astra 1. The LNB on the right will be the offset LNB, the inbuilt diseqc switch will recognize this as Port 2 or Port b and will be your 19 degrees astra 1 LNB. This will be your 13 degrees East Hotbird LNB. What is happening at the moment is that, in the absence of proper settings, the Receiver defaults to Port A (Hotbird), even when you select the Astra 1 data table. The LNB on the left goes in to the LNB holder on your dish and the diseqc switch will recognize this LNB as Port 1 or Port A. Ce tutoriel s'applique en vrit tout type de rcepteur et sur tous les satellites.Si vous arrivez comprendre le principe de fonctionnement d'un Diseqc e. HDSAT LNB Monobloc Astra & Hotbird 2 Sorties HD 4K Astra par Défaut. No point in doing any rotating until you get the DiSEqC right. HDSAT LNB Monobloc Astra & Hotbird 2 Sorties HD 4K Astra par Défaut: High-tech. Then someone familiar with it can tell you where the DiSEqC options reside - or you could read the Manual It will also help if you tell us what Dish you are using, as a Monoblock is designed for an 80cm Dish, though it will work with anything from about 60cm up to about 90cm.
It might help if you tell us what Receiver you're using.
0 kommentar(er)
